During the development of the new Arctic P14 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM is particularly suitable for use on heatsinks and radiators.
Specifications
- Fan Connector(s): 4-pin
- Fan Dimensions: 140 x 27 mm
- Fan Controller: PWM
- Rotation Speed: 200-1700 rpm (0 rpm below 5% PWM)
- Fan Bearing: Fluid Dynamic Bearing
- Air Flow: 72.80 CFM
- Noise level: 0.3 Sone
- Power: 12V
- Power Draw: 0.12A
About the Arctic P14 PWM 140mm Case Fan
More Efficient Technology
The motor is powered by a PWM IC of the newest generation, which allows the new Arctic P14 PWM to run much more efficiently than its predecessors. This saves energy without compromising performance.
Maximum Quietness, Minimum Vibration
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
Extended Life Span
A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years.
0 dB Mode – Zero rpm
The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.
200 to 1700 rpm
Thanks to the 4-Pin Connector, the rpm can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.
