The Arctic Freezer A35 RGB is a single tower CPU cooler that is designed specifically for AMD processors. It offers high performance cooling, low noise operation and easy installation.
The Arctic Freezer A35 RGB fan has 12 analog RGB LEDs in the fan hub that are uniformly controllable and compatible with the common RGB standards of leading motherboard manufacturers.
Socket Compatibility
- AMD: AM5, AM4
About the Arctic Freezer A35 RGB AMD AM4/AM5 CPU Cooler
MX-5 Thermal Paste
The Arctic Freezer A35 RGB comes with a 0.8 g syringe of the new MX-5 thermal paste, which is ARCTIC’s ultimate performance thermal compound. It enables a particularly thin layer thickness due to its low viscosity and particle size and significantly reduces the heat build-up between the heat spreader of the CPU and the cooler.
Pressure-Optimised Fan
The fan installed in the Freezer A35 benefits from all the advantages of the P-fans. With their low-vibration, power-saving motor and hydrodynamic plain bearing, they combine quiet and efficient operation. Despite its high fin density, the fan guarantees a high static pressure with its focused air flow and is therefore ideal for use on radiators and heat sinks. The speed of the fan can be dynamically controlled via PWM and can thus be optimally adapted to any scenario.
Simple Installation
The Arctic Freezer A35 RGB is a socket-specific installation variant for AM4. This reduces unnecessary mounting material and additionally simplifies the installation. ARCTIC uses an improved and simplified mounting system with spring-loaded screws for the Freezer A35. This achieves optimum contact pressure and even distribution of the thermal compound. Due to its compact design, it allows unrestricted RAM compatibility when installed.
Make Your System Shine
The Freezer A35 RGB fan has 12 analog RGB LEDs in the fan hub. These are uniformly controllable and compatible with the common RGB standards of leading motherboard manufacturers. The fan can be connected directly via a 12 V 4-pin RGB header on the mainboard. Alternatively, the cooler can also be illuminated via an external Controller and synchronised with the lighting of other hardware.